Please select your blind type for your child-safe pack
We accept all major credit cards. A Paypal account is not required to order from our online shop.
Please install your child safety devices as soon as you take delivery. Don't leave it to chance!
Postage rates
Vertical Blinds
Vertical Blind Safety Box Pack
Eliminates free-hanging loop and provides a safe and tidy finish.
1 x safety box
4 x screws
4 x rawl plugs
£2.80 (Plus P&P)
Fitting instructions
1. Simply loop the cord & chain and push down on the tensioning studs.
2. With a pencil, mark the window surround or wall where the clip is to be fixed.
3. Fix to the window surround or wall with screws.*
4. Pop on the cover for a safe and tidy finish.
* If fixing to a plaster wall use a 5.5mm masonry drill bit and the rawl plugs provided.
Tools required: pencil; Phillips screwdriver. (Drill & 5.5mm masonry bit if fixing to a plaster wall)
Hide fitting instructions
Roller Blinds
Roller Blind Safety Box Pack
Eliminates free-hanging loop and provides a safe and tidy finish.
1 x safety box
2 x screws
2 x rawl plugs
£2.60 (Plus P&P)
Fitting instructions
1. Simply loop the cord and push down on the tensioning studs.
2. With a pencil, mark the window surround or wall where the clip is to be fixed.
3. Fix to the window surround or wall with screws.*
4. Pop on the cover for a safe and tidy finish.
* If fixing to a plaster wall use a 5.5mm masonry drill bit and the rawl plugs provided.
Tools required: pencil; Phillips screwdriver. (Drill & 5.5mm masonry bit if fixing to a plaster wall)
Hide fitting instructions
P-Shaped Clip Pack
Eliminates free-hanging loop and keeps the cord tensioned.
1 x P-shaped clip
1 x screw
1 x rawl plug
£2.00 (Plus P&P)
Fitting instructions
1. Pull the cord up into the P-shaped clip.
2. Make sure the cord is pulled tight.
3. With a pencil, mark the window surround or wall where the clip is to be fixed.
4. Screw the clip to the window surround or wall.
* If fixing to a plaster wall use a 5.5mm masonry drill bit and the rawl plug provided.
Tools required: pencil; Phillips screwdriver. (Drill & 5.5mm masonry bit if fixing to a plaster wall)
Hide fitting instructions
Venetian Blinds
Clear Breakaway Tassel
The tassel will break apart when put under undue pressure. Cord stop stops the cord being fed back through the headrail to form a loop.
1 x clear breakaway tassel
2 x cord stop
£1.20 (Plus P&P)
Fitting instructions
Cord Cleat Pack
Simply wind cords around the cleat out of the reach of children.
2 x cord cleat
2 x screws
2 x rawl plugs
£1.90 (Plus P&P)
(We recommend one cord cleat pack per cord)
Fitting instructions
1. Using a pencil, mark the point where the first cleat is to be fixed. This should be high onto an adjacent wall and out of the reach of children.
2. Fix to the wall with the screw provided.
3. Using a pencil, mark the point where the second cleat is to be fixed. This should be six inches down from the first cleat.
4. Fix to the wall with the screw provided.
5. Simply wind the cord round the two cleats in a figure of 8.
* If fixing to a plaster wall use a 5.5mm masonry drill bit and the rawl plug provided.
Tools required: pencil; Phillips screwdriver. (Drill & 5.5mm masonry bit if fixing to a plaster wall)
Hide fitting instructions
Pleated Blinds
Cord Cleat Pack
Simply wind cords around the cleat out of the reach of children.
2 x cord cleat
2 x screws
2 x rawl plugs
£1.90 (Plus P&P)
(We recommend one cord cleat pack per cord)
Fitting instructions
1. Using a pencil, mark the point where the first cleat is to be fixed. This should be high onto an adjacent wall and out of the reach of children.
2. Fix to the wall with the screw provided.
3. Using a pencil, mark the point where the second cleat is to be fixed. This should be six inches down from the first cleat.
4. Fix to the wall with the screw provided.
5. Simply wind the cord round the two cleats in a figure of 8.
* If fixing to a plaster wall use a 5.5mm masonry drill bit and the rawl plug provided.
Tools required: pencil; Phillips screwdriver. (Drill & 5.5mm masonry bit if fixing to a plaster wall)
Hide fitting instructions
Roman Blinds
Cleat Pack for Corded Roman Blinds
Simply wind cords around the cleat out of the reach of children.
2 x cord cleat
2 x screws
2 x rawl plugs
£1.90 (Plus P&P)
(We recommend one cord cleat pack per cord)
Fitting instructions
1. Using a pencil, mark the point where the first cleat is to be fixed. This should be high onto an adjacent wall and out of the reach of children.
2. Fix to the wall with the screw provided.
3. Using a pencil, mark the point where the second cleat is to be fixed. This should be six inches down from the first cleat.
4. Fix to the wall with the screw provided.
5. Simply wind the cord round the two cleats in a figure of 8.
* If fixing to a plaster wall use a 5.5mm masonry drill bit and the rawl plug provided.
Tools required: pencil; Phillips screwdriver. (Drill & 5.5mm masonry bit if fixing to a plaster wall)
Hide fitting instructions
P-Shaped Clip for Endless Cord System
Eliminates free-hanging loop and keeps the cord tensioned.
1 x P-shaped clip
1 x screw
1 x rawl plug
£2.00 (Plus P&P)
PLEASE NOTE. The cords that run through the back of roman blinds can still be a danger to children.
Fitting instructions
1. Pull the cord up into the P-shaped clip.
2. Make sure the cord is pulled tight.
3. With a pencil, mark the window surround or wall where the clip is to be fixed.
4. Screw the clip to the window surround or wall.
* If fixing to a plaster wall use a 5.5mm masonry drill bit and the rawl plug provided.
Tools required: pencil; Phillips screwdriver. (Drill & 5.5mm masonry bit if fixing to a plaster wall)
Hide fitting instructions
Postage rates
